Juniper SRX 210 Services Hardware Manual page 81

Position a mounting bracket on each side of the chassis as shown in
1.
Figure 8 on page 61.
Figure 8: Installation of SRX 210 Services Gateway on a Rack
Use a number–2 phillips screwdriver to install the screws that secure the mounting
2.
brackets to the chassis.
Have one person grasp the sides of the device, lift it, and position it in the rack.
3.
Align the bottom hole in each mounting bracket with a hole in each rack rail as
4.
shown in Figure 9 on page 62 making sure the chassis is level.
Chapter 7: Installing the SRX 210 Services Gateway
Installing the SRX 210 Services Gateway in a Rack
61