Displaying Basic Connectivity Configurations For The Srx 210 Services Gateway - Juniper SRX 210 Services Hardware Manual

Displaying Basic Connectivity Configurations for the SRX 210 Services Gateway

To verify that the SRX 210 services gateway has the settings you configured, you
should display the basic connectivity configurations. Because the basic connectivity
settings appear in different places in the configuration hierarchy, displaying the entire
configuration at once makes viewing the settings easier.
To display the basic connectivity settings, select
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the
output. Your output would display the values you set.
The output shows a basic connectivity configuration. Verify that the values displayed
are correct for your services gateway.
Related Topics
Chapter 10: Establishing Basic Connectivity for the SRX 210 Services Gateway
[edit]
user@host# show
system {
host-name devicea;
domain-name lab.device.net;
domain-search [ lab.device.net device.net ];
backup-device 192.168.2.44;
time-zone America/Los_Angeles;
root-authentication {
ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@devicea.lab.device.net";
}
name-server {
10.148.2.32;
}
services {
}
ntp {
server 10.148.2.21;
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 172.16.1.24/32;
}
}
}
}
SRX 210 Services Gateway Basic Connectivity Overview on page 78
Connecting an SRX 210 Services Gateway to the J-Web Interface on page 86
Displaying Basic Connectivity Configurations for the SRX 210 Services Gateway
command. Review the following sample
show
99