1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications; Table 17: 1-Port T1/E1 Mini-Pim Network Interface Specifications - Juniper SRX Series Manual

1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) has the network interface
specifications given in Table 17 on page

Table 17: 1-Port T1/E1 Mini-PIM Network Interface Specifications

Specification
Network interface specifications
Transmit bit rate
Receive bit rate
Line encoding
Mode
Fractional Framing
HDLC features
N x 64 Kbps or N x 56 Kbps,
nonchannelized data rates
CRC
Shared Flag
Idle flag/fill
Counters:
1-Port T1/E1 Mini-Physical Interface Module Overview on page 65
1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications on page 66
1-Port T1/E1 Mini-Physical Interface Module Supported Standards on page 68
1-Port T1/E1 Mini-Physical Interface Module Key Features on page 66
1-Port T1/E1 Mini-Physical Interface Module LEDs on page 67
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics on page 68
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration on page 215
Chapter 2: Network Interface Specifications
23.
T1 Specification
1.544 Mbps
1.544 Mbps
AMI/B8ZS
Framed Clear Channel
Superframe (D4/SF), Extended
Superframe (ESF)
(T1:N=1 to 24)
16/32
Supported
Supported
Runts, Giants, FCS, Error, Abort
Error, Align Error
E1 Specifications
2.048 Mbps
2.048 Mbps
HDB3
Framed Clear Channel,
Unframed Clear Channel
G704 without CRC4 Unframed
(E1:N=1 to 31)
16/32
Supported
Supported
Runts, Giants, FCS, Error, Abort
Error, Align Error
23