Maintaining The Srx5400 Services Gateway Hardware Components; Tools And Parts Required To Maintain The Srx5400 Services Gateway; Routine Maintenance Procedures For The Srx5400 Services Gateway - Juniper SRX5400 Hardware Manual

CHAPTER 11
Maintaining the SRX5400 Services
Gateway Hardware Components

Tools and Parts Required to Maintain the SRX5400 Services Gateway

Related
Documentation

Routine Maintenance Procedures for the SRX5400 Services Gateway

Purpose
Action
Copyright © 2014, Juniper Networks, Inc.
Tools and Parts Required to Maintain the SRX5400 Services Gateway on page 81
Routine Maintenance Procedures for the SRX5400 Services Gateway on page 81
Maintaining the Air Filter on the SRX5400 Services Gateway on page 82
Maintaining the Fan Tray on the SRX5400 Services Gateway on page 82
Maintaining the SRX5400 Services Gateway Host Subsystem on page 83
Maintaining the SRX5400 Packet Forwarding Engine Components on page 84
Handling and Storing SRX5400 Services Gateway Cards on page 87
Maintaining SRX5400 Services Gateway Power Supplies on page 91
To maintain hardware components, you need the following tools and parts:
ESD grounding wrist strap
Flat-blade (–) screwdriver
Phillips (+) screwdriver, number 1
Phillips (+) screwdriver, number 2
Routine Maintenance Procedures for the SRX5400 Services Gateway on page 81
For optimum services gateway performance, perform preventive maintenance procedures
regularly.
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the device and into the air intake vents.
Check the status-reporting devices on the craft interface—System alarms and LEDs.
81