Paper Feed Selection; Rds (Remote Diagnostic System) - Ricoh 185 Operating Instructions Manual

Facsimile User Tools
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
7
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
190
E
Enter the function "Prt.U.Parame-
ters" using the number keys.
F
Press the { { { { Start} } } } key to print the
list.
Note
If you press [Cancel] before
printing starts, the printing
stops and the display shown in
3 appears again.
G
Press [PrevMenu].
H
Press the { { { { User Tools/Counter} } } } key.

Paper Feed Selection

Using this feature, you can select
which tray to print out the message. If
you wish to use this feature, change
User Parameter Switch 15 digits 0 to
2.
RDS (Remote Diagnostic
System)
If your machine has a problem, a ser-
vice representative can perform vari-
ous diagnostic
telephone line from the service sta-
tion to try to find out what is wrong
with your machine. The service tech-
nician can also use RDS to change
some of your machine's settings if
you request it.
If you wish to use this feature, change
User Parameter Switch 25 digit 4.
tasks over the