Storing A Card - Juniper SRX 5800 Installation Instructions Manual

Services gateway
Hide thumbs Also See for SRX 5800:
Table of Contents

Advertisement

Never carry the card by the faceplate with only one hand.
Do not rest any edge of a card directly against a hard surface (see
Figure 5 on page 7).
Do not stack cards.
Figure 5: Do Not Rest the Card on an Edge
If you must rest the card temporarily on an edge while changing its orientation
between vertical and horizontal, use your hand as a cushion between the edge and
the surface.

Storing a Card

You must store a card as follows:
When you store a card on a horizontal surface or in the shipping container, always
place it inside an antistatic bag. Because the card is heavy, and because antistatic
bags are fragile, inserting the card into the bag is easier with two people. To do this,
one person holds the card in the horizontal position with the faceplate facing the
body, and the other person slides the opening of the bag over the card connector
edge.
In the device chassis
In the container in which a spare card is shipped
Horizontally and sheet metal side down
Handling and Storing Cards
Handling and Storing Cards
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx 5600

Table of Contents