Apply And Save Settings - Cisco SG300 Setup Manual

Cisco SG300 SETUP GUIDE

Apply and Save settings

All settings that have been previously updated will not be finalised until the configuration is saved and the switch is rebooted. To
save the configuration:
Under 'Administration menu
Select 'File Management'
Select 'Copy/Save Configuration'
Click 'APPLY' to save the settings
Then you must reboot the switch for settings to be applied
To reboot the switch:
Under 'Administration menu
Select 'File Management'
Select 'Reboot'
Click 'Reboot'
Note: The switch will take several minutes to reboot but will then be ready to use with the ELAN Video Over IP HDMI
products
contact techsupport@elanhomesystems.com
11