Dot1X Re-Authenticate - Cisco Catalyst 3560-X Command Reference Manual

dot1x re-authenticate

dot1x re-authenticate
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-180
Downloaded from www.Manualslib.com
Use the dot1x re-authenticate privileged EXEC command on the switch stack or on a standalone switch
to manually initiate a re-authentication of the specified IEEE 802.1x-enabled port.
dot1x re-authenticate [interface interface-id]
interface interface-id (Optional) Stack switch number, module, and port number of the interface
to re-authenticate.
There is no default setting.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
You can use this command to re-authenticate a client without waiting for the configured number of
seconds between re-authentication attempts (re-authperiod) and automatic re-authentication.
This example shows how to manually re-authenticate the device connected to a port:
Switch# dot1x re-authenticate interface gigabitethernet2/0/1
Command
dot1x reauthentication
dot1x timeout reauth-period
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Enables periodic re-authentication of the client.
Sets the number of seconds between re-authentication
attempts.
OL-21522-02