C Commands
clear ip arp inspection statistics vlan
To clear the Dynamic ARP Inspection (DAI) statistics for a specified VLAN, use the clear ip arp inspection
statistics vlan command.
clear ip arp inspection statistics vlan vlan-list
Syntax Description
vlan vlan-list
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to clear the DAI statistics for VLAN 2:
switch# clear ip arp inspection statistics vlan 2
switch#
This example shows how to clear the DAI statistics for VLANs 5 through 12:
switch# clear ip arp inspection statistics vlan 5-12
switch#
This example shows how to clear the DAI statistics for VLAN 2 and VLANs 5 through 12:
switch# clear ip arp inspection statistics vlan 2,5-12
switch#
Related Commands
Command
clear ip arp inspection log
Specifies the VLANs whose DAI statistics this
command clears. The vlan-list argument allows you
to specify a single VLAN ID, a range of VLAN IDs,
or comma-separated IDs and ranges (see the
"Examples" section). Valid VLAN IDs are from 1 to
4094.
Modification
This command was introduced.
Description
Clears the DAI logging buffer.
Cisco Nexus 7000 Series Security Command Reference
clear ip arp inspection statistics vlan
87