clear ip arp inspection log
clear ip arp inspection log
Use the clear ip arp inspection log privileged EXEC command to clear the dynamic Address Resolution
Protocol (ARP) inspection log buffer.
Syntax Description
This command has no arguments or keywords.
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
12.2(50)SE
Examples
This example shows how to clear the contents of the log buffer:
Switch# clear ip arp inspection log
You can verify that the log was cleared by entering the show ip arp inspection log privileged command.
Related Commands
Command
arp access-list
ip arp inspection log-buffer
ip arp inspection vlan
logging
show ip arp inspection
Cisco ME 3400 Ethernet Access Switch Command Reference
2-38
clear ip arp inspection log
Modification
This command was introduced.
The command was supported in the metro base image.
log
Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Defines an ARP access control list (ACL).
Configures the dynamic ARP inspection logging buffer.
Controls the type of packets that are logged per VLAN.
Displays the configuration and contents of the dynamic ARP
inspection log buffer.
OL-9640-10