Create Udp-Profile - Extreme Networks ExtremeWare Command Reference Manual

create udp-profile

create udp-profile
create udp-profile <profile_name>
Description
Creates a UDP-forwarding destination profile that describes the types of UDP packets (by port number)
that are used, and where they are to be forwarded.
Syntax Description
profile_name Specifies a UDP profile name.
Default
N/A
Usage Guidelines
You must give the profile a unique name, in the same manner as a VLAN, protocol filter, or Spanning
Tree Domain (STD). A maximum of 10 UDP-forwarding profiles can be defined.
Example
The following command creates a UPD profile named backbone:
create udp-profile backbone
History
This command was first available in ExtremeWare 4.0.
This command was added to the "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide 1693