Direct Extension Dial Delay (#112); Direct Extension Dial Record/Playback (I892) - Avaya PARTNER ACS Installation And Use Manual

Using the Direct Extension Dial Button
To turn Direct Extension Dial on, press the Direct Extension Dial Button at extension 10. The
green light is on steady and Direct Extension Dial is on. If calls are ringing when you turn Direct
Extension Dial on, the calls are answered immediately by the system.
To turn Direct Extension Dial off, press the Direct Extension Dial Button at extension 10. The
green light goes off and Direct Extension Dial is off. Any calls being answered by the system
continue to hear the recorded message and are prompted to enter a destination extension.

Direct Extension Dial Delay (#112)

Use this feature to specify the number of times (0—9) an incoming call should ring before it is
answered by the Direct Extension Dial feature.
Considerations
This feature works independently of Line Ringing, which determines how an outside call rings
I
at the extension–immediately, after a 20 second delay, or not at all. Direct Extension Dial
Delay specifies the number of rings a caller hears before the system answers the call.
If you use Caller ID, make sure Direct Extension Dial Delay is set to 2 rings or more to
I
ensure that Caller ID information is captured.
Programming
To change the number of times an incoming call rings at extension 10 before the system answers
it:
f00ss#112
1. Press
2. To change the number of rings, press
range from 0 to 9, where 0 means the call is answered immediately. The factory setting is 2.
3. Select another procedure, or exit programming mode.

Direct Extension Dial Record/Playback (I892)

Use this feature to record and play back the message that callers hear when a call is answered by
the Direct Extension Dial feature. The maximum length of the message is 40 seconds.
Considerations
You can record only one message for Direct Extension Dial.
I
You must record the Direct Extension Dial message from the system display telephone at
I
extension 10.
.
D
until the appropriate value appears. Values
Operator Features
Direct Extension Dial Features
7-13