Avaya PARTNER ACS Installation And Use Manual page 237

To prevent unauthorized persons from viewing the log, Caller ID calls cannot be viewed at a
I
locked station.
The date and time of an incoming call is logged from the central office. Therefore, the date and
I
time of the call that you see on the system display telephone may be different from the date
and time reported in the SMDR report for the extension.
You can use this feature while using Call Screening (F25).
I
Examples
The examples below show how unanswered Caller ID information is logged:
Line 6 is associated with extensions 11 and 12 for Call Logging. If a central office call rings
I
and is not answered on line 6, it is logged as "unanswered" on extensions 11 and 12. If it is
answered, it is logged only if the answering extension has been programmed to log answered
calls or to log all calls.
Line 5 is associated with extension 11 for Call Logging. A user at extension 11 answers a call,
I
transfers it to extension 12, and the caller hangs up before it is answered. The call is logged as
unanswered at extension 12.
When a call is answered, it is not logged unless the system has been programmed to log
I
answered calls by using Caller ID Log Answered Calls, or an extension is programmed to
answer all calls by using Caller ID Log Line Assignment and Caller ID Log All Calls.
Programming
To program a Call Log Display button:
1. Press f00
2. Press a programmable button with lights.
f23
3. Press
4. Program another button for this extension, or exit programming mode.
Using the Caller ID Logging and Dialing Feature
When Caller ID information is logged for your extension and you have programmed a Call Log
button, the word Calls is displayed, as shown in
version, the dialed digits will display slightly differently than shown in the illustrations in this
document.)
.
.
Programming & Using Telephone Features
Figure 8-1. (For the Hong Kong Release 3.0
Caller ID Features
8-21