Pool Access Restriction (#315) - Avaya PARTNER ACS Installation And Use Manual

Programming
Follow these steps to change the mode of operation of the system to Hybrid mode:
f00ss#198
1. Press
2. Enter the system password which is 863285.
3. Enter the number for the mode of operation:
1 for Key (the factory setting) ✔
I
2 for Hybrid
I
The system resets.

Pool Access Restriction (#315)

Use this feature to restrict a pooled extension from receiving and/or making outside calls on all
lines belonging to a specific pool. For example, you may want customer service representatives to
make calls using the WATS lines that belong to auxiliary pool 881, but not receive incoming calls
on the lines in that pool; in this case, you assign pool 881 to the customer service representative's
telephones and restrict the pool to Out Only.
This procedure is the most extreme way to restrict dialing. For example, an extension set to In Only
or No Access for a particular pool cannot select that pool to dial out–even for numbers on the
Emergency Phone Number List (#406).
Considerations
For extension 10 and any extensions for which Line Access Mode (#313) is set to Key, this
I
feature is automatically set to No Access.
When a user has access to a pool for outgoing calls, you can customize dialing restrictions for
I
the user's extension by using Outgoing Call Restriction (#401) and Disallowed Phone
Number Lists (#404).
To restrict a pooled extension from receiving and/or making calls on individual lines, you must
I
use Line Access Restriction (#302).
Caller ID information does not appear for ringing calls on lines belonging to a pool
I
programmed for Out Only or for No Access.
Programming
To restrict an extension from making or receiving calls on all the lines in a specific pool:
1. Press f00ss#315
2. Enter the number of the extension to be programmed. A display similar to the following
appears:
Pool Access Rstr 23
Pool:
Programming System Options
.
.
Pool Programming
4-45