Avaya PARTNER ACS Installation And Use Manual page 133

Advanced communications system
Hide thumbs Also See for PARTNER ACS:
Table of Contents

Advertisement

Users must have access to an outside line or pool in order to dial numbers on the Emergency
I
Phone Number List (#406).
You can use Line Ringing to identify when each pool and individual line assigned to an
I
extension should start ringing (the factory setting for pools is No Ring and for lines is
Immediate Ring).
If you want to prevent a user at an extension from accessing all the lines in a pool, you must
I
restrict the extension using Pool Access Restriction (#315).
Remove pools from Hotline (#603) and Doorphone (#604/#605) extensions to prevent calls
I
from being made or received on them.
You can use Line Access Mode (#313) to change an extension from a pooled extension to a
I
key extension.
When you use Unique Line Ringing (#209), incoming calls that ring at a pool button ring with
I
the pattern assigned to that line. You can assign individual ring patterns to lines within a pool.
Programming
To assign pools to a pooled extension:
f00ss#314
1. Press
2. Enter the system extension number to be programmed.
There is a steady red light next to each button that has a line assigned and a flashing red light
next to each button that has a pool assigned. To remove all existing pool assignments, press
r
before selecting a pool.
3. Enter the desired pool access code (880, 881, 882, or 883). For example, to select pool 881,
press
881
.
4. Do one of the following:
If you want to assign the pool to the first available button with lights, press
I
display similar to the following appears:
Pool Ext Assign 15 P881
1 Assigned
If you want to remove a pool assignment, press
I
following appears:
Pool Ext Assign 15 P881
2 Not Assigned
For auxiliary pools only, if you want to assign the pool to a specific button, press
I
display similar to the following appears:
Pool Ext Assign 15 P881
3 Select a Button
Then press a button with lights to assign the auxiliary pool to that button. If you use option
3 after an auxiliary pool has been assigned, the auxiliary pool moves from the old button to
the new button you select.
Programming System Options
.
D
until a display similar to the
D
until a
3
. A
Pool Programming
4-47

Advertisement

Table of Contents
loading

Table of Contents