Using Contact Closure On A System Telephone - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Use Contact Closure Operation Type to specify how long the Contact Closure remains
I
active when activated.
If the Contact Closure Operation Type is set to Toggle, one user can activate the Contact
Closure and another user can deactivate it, provided both users are included in the Contact
Closure Group for that Contact Closure.
When the Contact Closure Operation Type is set to Toggle, if a user activates the Contact
Closure (so that the toggle is On) and then a power failure occurs, the toggle automatically
changes to Off as a security measure.
If you plan to use a Contact Closure to control a door lock, you may also want to install a
I
doorphone at that door. Use Doorphone Extension to identify the extension to which the
doorphone is connected, and Doorphone Alert Extensions to identify the extensions that
signal when the doorphone button is pressed. You can assign some or all of the Doorphone
Alert extensions to a Contact Closure Group, so that users at those extensions can control
the door lock.
You can use this feature while using Call Screening (F25).
I
Programming
To program a Contact Closure button:
f00
1. Press
2. Press a programmable button, preferably one with lights.
3. Press f41
4. Program another button for this extension, or exit programming mode.

Using Contact Closure on a System Telephone

To activate a Contact Closure:
1. Press the programmed button or press
(for Contact Closure 2).
The green light is on steady.
2. If the Contact Closure Operation Type for that Contact Closure is set to Toggle, repeat Step
1 to deactivate the Contact Closure.
The green light goes off.
Contact Closure (F41 and F42)
8-28
.
(for Contact Closure 1) or
f41
f42 (for Contact Closure 2).
(for Contact Closure 1) or f42