Setting The Date, Day, And Time; Considerations; System Date (#101) - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
6. Dial the extension number of the telephone to be programmed.
The green lights next to buttons on which lines or pools are assigned show the current Line
Ringing settings. The remaining buttons can be programmed with telephone numbers,
extension numbers, or system features.
7. At this point, program the features that must use Centralized Telephone Programming.
8. To change the settings for another extension, press
number.
9. To exit programming mode, you can press
the cradle.

Setting the Date, Day, and Time

After supplying power to the control unit, use the following procedures to set the system clock:
System Date (#101) to set the month, day, and year
I
System Day (#102) to set the day of the week (for Release 2.0 and earlier systems)
I
System Time (#103) to set the hour and minutes
I
Automatic Daylight/Standard Times (#126) to automatically update the system clock
I
Turn this feature off if you live in an area without daylight savings time.

Considerations

Backup Programming–Automatic (#123) uses the System Date and System Time to
I
schedule the automatic backups.
Backup Programming–Automatic (#123) and Backup Programming–Manual (#124) do
I
not back up the System Date, the System Day, or the System Time.
Restore Programming (#125) does not restore the System Date, System Day, or System
I
Time.
Be sure that the System Date, System Day, and System Time are set correctly before using
I
backup procedures.

System Date (#101)

Use this feature to set the month, day, and year. The system displays only the month and day on
display telephones when the telephone is idle; the month, day, and year print on SMDR call
reports.

Setting the Date, Day, and Time

3-8
c
f00
, or lift the handset and place it back in
; then dial the new extension