Call Pickup (I6Xx); Using Call Park On A Single-Line Telephone - Avaya PARTNER ACS Installation And Use Manual

Using Call Park on a Single-Line Telephone

To park a call:
1. While on a call, press the switchhook or
The call is put on hold and you hear intercom dial tone.
2. Dial your two-digit extension number.
3. Hang up.
If the call is not picked up within three minutes, it rings back at your extension. If you are on
another call when the parked call returns, you will not receive notification even if Call Waiting
is assigned to your extension. The parked call rings back when your telephone is idle.
To retrieve a parked call using Call Pickup:
1. Lift the handset.
You hear intercom dial tone.
2. Dial 6 and the extension number where the call is parked.

Call Pickup (I6XX)

Use this feature to answer any intercom, outside, or transferred call ringing at another specified
extension (where XX is a system extension number). This feature is useful for officemates who
agree to answer each other's calls.
Considerations
You can program a Call Pickup button on a system telephone to pick up with one touch a call
I
that is ringing or parked at another specified extension.
Use this feature to retrieve a parked call. If you use Call Pickup to answer a call that is parked
I
at an extension that also has ringing calls, you are connected to the parked call–parked calls
take precedence over ringing calls.
Programming
To program a Call Pickup button:
f00
1. Press
2. Press a programmable button.
3. To specify the extension to be answered, press left
system extension number. For example, to answer a call ringing at extension 23, press left
i623
4. Program another button for this extension, or exit programming mode.
.
.
Programming & Using Telephone Features
R
.
i
, followed by 6 and the two-digit

Call Pickup (I6XX)

8-15