Intercom Dial Tone (#309) - Avaya PARTNER ACS Installation And Use Manual

3. At the Data - - - - - - - - - - - - prompt, enter the alert extension number (use 70 for the
loudspeaker paging system). A display similar to the following appears:
Internal Hotline Ext 33
Data 32
4. Do one of the following:
To change the hotline and alert extension numbers you just entered, repeat Steps 2 and 3.
I
To delete the existing hotline and alert extension numbers, press
I
To identify another hotline and alert extension pair, press
I
hotline extension number appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.

Intercom Dial Tone (#309)

Use this feature to determine the type of dial tone that the system provides at an extension. It may
be necessary to change this setting to Machine (outside line) dial tone for an autodialing device,
such as a fax or modem, that has trouble making calls. For example, if you have a modem that
checks for outside line dial tone before dialing, use this procedure to change from Regular to
Machine dial tone.
Use this procedure only if an autodialing device has trouble making calls.
Programming
To change the Intercom Dial Tone setting for an extension:
1. Press f00ss#309
2. At the Extension : prompt, enter the number of the extension to be programmed.
D
3. Press
1 = Regular dial tone (the factory setting) ✔
I
2 = Machine (outside line) dial tone
I
4. To program another extension, press
on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
until the appropriate value appears.
n
Programming System Options
n
at extension 10 or 11.
p
or until the extension number appears

Intercom Dial Tone (#309)

r
.
p
or until the new
4-39