Recall (F03); Using Privacy - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Programming
To program a Privacy button:
f00
1. Press
2. Press a programmable button with lights.
3. Press f07
4. Program another button for this extension, or exit programming mode.

Using Privacy

From a system telephone, press the programmed button to turn Privacy on. Press it again to turn
it off. Use the button like a switch–when the light is on, Privacy is on.

Recall (F03)

Use this feature to send a timed switchhook flash over the telephone line to "recall" a new dial tone
or to access a PBX, central office, or Centrex feature, such as Call Waiting.
Considerations
Using Recall on an intercom call disconnects the call.
I
Using Recall while recording an intercom call disconnects the call.
I
Whenever your PBX or Centrex documentation tells you to press the switchhook when you are
I
on an outside call, use the Recall feature instead. If you are already on a call, most PBX or
Centrex systems require that you press the switchhook to get a new dial tone and then dial a
feature access code to access a specific PBX or Centrex service.
– On a system telephone, press a programmed button or press
– On a single-line telephone, first press and release the switchhook to get intercom dial
tone. Then send a Recall signal by pressing
– On a (single-line) feature telephone that has a Recall or Flash button, first press the
Recall or Flash button to get intercom dial tone. Then send a system Recall signal by
#03
pressing
You can program a Recall button on a system telephone to send a Recall signal with one
I
touch.
Recall cannot be used with Call Screening (F25).
I
If users have trouble with Recall, use Recall Timer Duration to adjust the length of the Recall
I
signal. Your local telephone company can tell you the correct setting–for most Centrex
systems, the correct setting is 800 msec. (or 32).

Recall (F03)

8-48
.
.
.
f03
#03
.
to use Recall.