Centralized Telephone Programming Flow Chart-How To Use - Avaya PARTNER ACS Installation And Use Manual

Centralized Telephone Programming Flow Chart–How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
To Enter Programming Mode:
I
f00
– Press
– Press ssc
– Dial the extension number to be programmed. Buttons on to which lines or pools are assigned
light up to show the current Line Ringing setting: remaining buttons can be programmed with
Auto Dial number or features.
To Program Another Feature at the Same Extension:
I
– After you program one feature, continue with the instructions in the box for the next feature.
To Change Setting For Another Extension
I
– Press c
– Dial the new extension's number
To Erase A Feature or Auto Dial Button:
I
– Press the programmed button
– Press !
To End Programming Mode:
I
f00
– Press
Icon Description
= Factory setting
✔
= Button with lights required
= Button with lights recommended
= PARTNER ACS Revision 2.0 or later
2.0
= PARTNER ACS Revision 3.0 or later
3.0
Flow Charts
E-9