Avaya PARTNER ACS Installation And Use Manual page 247

If a line is in use, you cannot access it with this feature (you hear busy tone). For information
I
about accessing a ringing or held call, or joining a call in progress, see
Active Line (I68LL)" on page
If Line Access Restriction or Pool Access Restriction is set to No Access or In Only for a
I
line assigned to an extension or lines within a pool, a user at the restricted extension hears
busy tone if Direct Line Pickup is used to access that line to place a call.
Programming
To program a Direct Line Pickup–Idle Line button:
f00
1. Press
2. Press a programmable button.
i8
3. Press left
4. Program another button for this extension, or exit programming mode.
Using Direct Line Pickup–Idle Line on a System
Telephone
To use Direct Line Pickup–Idle Line on a system telephone:
1. If you want, lift the handset.
2. Do one of the following:
Press the programmed button and dial the two-digit system line number of the idle line you
I
want to access
i8
Press
I
If you did not lift the handset, the speaker comes on automatically.
Using Direct Line Pickup–Idle Line on a Single-Line
Telephone
To use Direct Line Pickup–Idle Line on a single-line telephone:
1. Lift the handset.
You hear intercom dial tone.
8
2. Dial and the two-digit system line number of the idle line you want to access.
8-29.
.
.
and the two-digit line number.
Programming & Using Telephone Features
"Direct Line Pickup–
Direct Line Pickup Features
8-31