Display Language (#303); Distinctive Ring (#308); Considerations; Programming - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Display Language (#303)

Use this feature to change the language in which display messages appear if the extension has a
system display telephone. The language is set for each extension, so telephones in the same
system can display different languages.

Considerations

If SMDR is used, the call report header is printed in the language specified for extension 10.

Programming

To change the Display Language setting for an extension:
f00ss#303
1. Press
The current Display Language displays.
2. Enter the number of the extension to be programmed.
3. To change the Display Language, press
1 = English (the factory setting) ✔
I
2 = Spanish
I
3 = French
I
4. To program another extension, press
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.

Distinctive Ring (#308)

Use this feature to determine whether calls should ring at a tip/ring device using the system's
distinctive ringing patterns–different patterns for outside, intercom, and transferred calls–or
whether all calls to the tip/ring device should ring like outside calls.
Considerations
Change the setting to Not Active if a tip/ring device such as a modem or answering machine
I
does not pick up intercom or transferred calls.
If distinctive ring is set to Not Active for an extension with both a system telephone and a tip/
I
ring device, the system telephone continues to use the system's distinctive ringing patterns,
but all calls ring at the tip/ring device using a single ring burst.

Display Language (#303)

4-26
at extension 10 or 11.
D
until the appropriate value appears.
n p
or until the extension number appears