Save Number Redial (F04) - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
System Speed Dial numbers cannot be redialed with this feature.
I
A Last Number Redial number can begin with a star code; the system automatically inserts a
I
delay based on the Star Code Dial Delay setting.
A number dialed automatically by using the Caller ID Call Logging and Dialing feature can
I
be redialed with Last Number Redial.
Last Number Redial interrupts Call Screening (F25).
I
Programming
To program a Last Number Redial button:
f00
1. Press
2. Press a programmable button.
3. Press f05
4. Program another button for this extension, or exit programming mode.
Using Last Number Redial on a System Telephone
To use Last Number Redial:
1. Lift the handset.
2. Press the programmed button or
Digits are displayed on system display telephones as they are dialed.
Using Last Number Redial on a Single-Line Telephone
To use Last Number Redial:
1. Lift the handset.
You hear intercom dial tone.
2. Press #05

Save Number Redial (F04)

Use this feature to save into temporary memory the last outside number (up to 28 digits) dialed
from an extension with a system telephone. Use this feature to save a number before you hang up
on a busy or unanswered call. Once saved, the number can be redialed at any time. The number
stays in memory until a different one is saved.
Save Number Redial is available only on system telephones.
Redialing Features
8-52
.
.
f05
.
.