®
PARTNER
Advanced Communications System Installation, Programming, and Use
Outside Conference Denial (#109)
Use this feature to determine if users can include more than one outside party in a conference call.
Considerations
This feature setting applies to all system users.
I
A conference call connects up to five parties (including the conference originator). If outside
I
conference is allowed, you can have up to two outside parties and up to three inside parties. If
outside conference is disallowed, you can have one outside party and up to four inside parties.
Programming
To allow or disallow conferences with two outside parties:
1. Press
f00ss#109
D
2. Press
1 = Allow conference calls with up to two outside parties (the factory setting) ✔
I
2 = Disallow conference calls with two outside parties
I
3. Select another procedure, or exit programming mode.
Pool Programming
When a Release 2.0 or later system is operating in Hybrid mode, you can group lines into pools to
help the routing of calls. Use the following features to program the use of pools in the system:
Mode of Operation
I
Pool Access Restriction
I
Pool Extension Assignment
I
Pool Line Assignment
I
Mode of Operation (#198)
Use this feature to change the operating mode of your system. Your system must be operating in
Hybrid mode to support the use of pools.
Outside Conference Denial (#109)
4-44
until the appropriate value appears:
at extension 10 or 11.