Caller Id Log All Calls (#319)-Release 2.0 Or Later - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
line. Caller ID calls can be logged only if they ring on an extension that is associated with a line
that has been programmed for Call Logging.
Caller ID Call Log Line Association is available on 24-character PARTNER-18D and -
34D display telephones. It is not available for MLS, MLC, Transtalk 9000-Series, or tip/
ring telephones.
Considerations
Use Caller ID Call Log Line Association to associate lines with the one extension that will
I
log all calls. Then use Caller ID Log All Calls (#319) to allow the extension to log all Caller ID
calls on the associated lines.
It is not necessary to associate lines and extensions to log unanswered transferred calls.
I
Unanswered transferred calls are logged automatically.
Programming
To associate a line with an extension for the purpose of logging Caller ID information:
1. Press f00ss#318
2. At the extension prompt, enter the number of the extension to be programmed.
3. At the Line prompt, enter the two-digit line number to be associated with the extension.
D
4. Press
1 = Assigned (line is associated with an extension or the extension is associated with a
I
line)
2 = Not assigned (line is not associated with an extension; the factory setting) ✔. Do one
I
of the following:
– To associate another line with this extension, press
number appears on the display. Then repeat Step 4.
– To associate another extension, press
2.
5. Select another procedure, or exit programming mode.
Caller ID Log All Calls (#319)–Release 2.0 or Later
Use this feature to program a maximum of one extension to log all answered Caller ID calls and all
unanswered Caller ID calls received at any extension on specific lines. You must use the Caller ID
Call Log Line Association (#318) programming procedure to associate lines with the extension
that will log all calls. Then use the Caller ID Log All Calls feature to allow the extension to log all
Caller ID calls on the associated lines. Once the features are activated for an extension, when the
user activates the Caller ID Call Logging and Dialing (F23), all Caller ID calls that are answered
or unanswered by any extension on the associated lines are logged. A telephone symbol (a
vertical handset) appears in the Call Status Display to indicate that the call being viewed has been
answered.
Caller ID Programming
4-12
until the appropriate value appears:
at extension 10 or 11.
n
or
N P
or
p
until the line
, and begin at Step