Call Park; Using Call Park On A System Telephone - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
To remove Call Forwarding:
1. Lift the handset.
You hear intercom dial tone.
#11
2. Press
3. Dial your extension number twice.

Call Park

Use this feature to "park" a call, or place it on a special type of hold, so it can be picked up from
any telephone in the system.
Considerations
Call Park typically is used for pooled extensions in Hybrid mode, because users can retrieve
I
calls without knowing which line the call is on.
You should park only one call at a time from your extension to ensure that you know which
I
caller you are talking to when you pick up the parked call.
Call Park is useful for single-line telephone users because they can retrieve a parked call
I
without knowing which line the call is on.
Use Call Pickup to retrieve parked calls.
I
If you frequently park calls and you have a system telephone, program your extension number
I
on an Auto Dial button, so you can park a call simply by pressing the button. See
Dialing" on page
Parked calls do not receive Call Waiting, Call Coverage, Call Forwarding, or VMS Cover.
I

Using Call Park on a System Telephone

To park a call:
1. While on a call, press
button programmed for your extension.
2. Hang up.
If the call is not picked up within three minutes, it rings back at your extension. If you used an
Auto Dial button, the green light next to the button flutters.
To retrieve a parked call using Call Pickup:
i6
1. Dial
2. Dial the extension number, or press an Auto Dial button for the extension where the call is
parked.

Call Park

8-14
.
8-5.
& and dial your two-digit extension number, or press the Auto Dial
.
"Auto