Table of Contents
Advertisement
© 2019 Avaya Inc. All rights reserved
•
•
•
•
•
•
Control API Extension (AT Commands)
AT commands can be used to control XT Series or XT Series devices.
The following commands have been extended or added since last major API documentation
release.
For full documentation, refer to https://support.avaya.com/downloads/download-
details.action?contentId=C20143693548450_0&productId=P1430
Table 1:
Recently Added or Modified Control API Commands
Version
CU 10.1.0
XT 9.2
Release Notes for Avaya XT Series
- TLS, the system will try TLS -> TCP -> UDP;
- TCP, the system will try TCP -> UDP
- UDP, the system will try only UDP
In this way, the system will make DNS resolution to find the IP addresses related to the
transport protocol used. If none of them is reachable using that transport protocol, the
system will switch to the next transport protocol, making a new DNS resolution.
Improved SIP presentation interoperability with ZOOM platforms: with previous releases, it
could happen your device receives the presentation as a mixed stream together with the
live video (AKA Gallery Layout). To have it as a second stream:
o
Press "1" via DTMF code to access the menu.
o
Press "0" to access more options.
o
Press "1" to toggle H.239 or BFCP for dual-screen.
Improved H323 video presentation interoperability with CISCO VCS ExpressWay: the
system on a private network registered to VCS through H.460 now can receive the video
presentation when a remote endpoint stops and starts presenting more than one time.
Some optimization for the Start-up Wizard
Added predefined SIP dial mappings for Zoom for integration with Exchange Calendar.
They can be changed to H.323 if needed.
Added automatic integration for any Exchange Calendar invitation containing "sip:" or
"h323:" URI Schemes in the location or in the body.
New/
Command/
Extended
Indication
Extended
SW
Description
Command to emulate go back to home page
What's New | 18
Advertisement
Table of Contents
