Avaya PARTNER ACS Installation And Use Manual page 340

®
PARTNER Advanced Communications System Installation, Programming, and Use
Figure 10-4. Removing the Plastic Protector
5. Before you insert the new module, make sure that all 400 (or 200) modules are installed to the
right of all 012E, 308EC, or 206 modules. If you have a 1600 DSL module, it must be in the first
slot on the left of the carrier (see
the new one, see
PARTNER ACS Release 5.0 supports Endeavor telephones when an Endeavor
362EC module is installed in the carrier. Install the Endeavor 362EC module(s) to the
right of the 1600 DSL module, if one is installed, and to the left of any 400 and 200
module.
Figure 10-5. Placement of Modules
Adding New Modules
10-8
Figure
"Replacing Modules" on page
I
N
E
S
E
X
T
E
N
S
I
O
N
S
Tab
Tab
10-5). If you need to move a module to accommodate
10-9.