Conference Drop (F06); Caller Id Name Display (F16) - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Caller ID Name Display (F16)

Use this feature to toggle the display between Caller ID number and Caller ID name. Caller ID
name is an optional feature of the Caller ID service provided by your local telephone company and
may not be available in your area (even if Caller ID number is available).
Considerations
Program this feature on a button with lights on a system display telephone. When Caller ID
I
Name Display is on, the green light is on, indicating that the Caller ID name will be displayed
rather than the Caller ID number.
SMDR reports print only Caller ID number (where available). (If a number is not available, it is
I
reported as "IN" on the call report.)
Caller ID Name Display has no effect on Call Coverage calls. Coverage calls always display
I
the extension number of the user who is sending calls for coverage.
You can use this feature while using Call Screening (F25).
I
While a TransTalk telephone is ringing, you can use Caller ID Name Display to pre-select
I
Caller ID name or Caller ID number to appear on the display.
Programming
To program a Caller ID Name Display button:
f00
1. Press
2. Press a programmable button with lights.
f16
3. Press
4. Program another button for this extension, or exit programming mode.
Using Caller ID Name Display
Press the programmed button to turn Caller ID Name Display on; press it again to turn it off.

Conference Drop (F06)

Use this feature to drop the last outside party added to a conference call without disconnecting the
other parties.
Considerations
You can program a Conference Drop button on a system telephone to use the feature with
I
one touch.
This feature cannot be used with Call Screening (F25).
I

Conference Drop (F06)

8-26
.
.