You can press
I
it is the first character in the stored number.
Programming
To program a Recall button:
1. Press
f00
2. Press a programmable button.
f03
3. Press
4. Program another button for this extension, or exit programming mode.
Using Recall on a System Telephone
To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the programmed button or
2. Enter the access code for the feature (if required).
3. To return to your original call, press the programmed button or
Using Recall on a Single-Line Telephone
To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the switchhook (or press the Recall or Flash button on a feature telephone that has
one).
You hear intercom dial tone.
2. Press
#03
3. Enter the access code for the feature (if required).
4. To return to your original call, press the switchhook (or press the Recall or Flash button on a
feature telephone) again.
S
to insert a Recall signal in an Auto Dial or Speed Dial number, provided
.
.
f03
.
Programming & Using Telephone Features
.
f03
again.
Recall (F03)
8-49