Avaya PARTNER ACS Installation And Use Manual page 272

®
PARTNER Advanced Communications System Installation, Programming, and Use
3. Enter the telephone number exactly as you would dial it. The number can be up to 28
characters consisting of the digits 0—9,
access by pressing
Enable).
4. Do one of the following:
To program another Personal Speed Dial number, start from Step 2.
I
To program over an existing number, enter the new number after selecting the two-digit
I
code.
To remove a Personal Speed Dial number, enter the number's two-digit code and press
I
! once.
5. Continue programming, or exit programming mode.
Using Personal Speed Dial on a System Telephone
To use Personal Speed Dial on a system telephone:
1. Lift the handset or press
2. Do one of the following:
If you want to call on a specific line, press the line button (or press
I
digit line number).
If you want to call using a specific pool, press the pool button (or press
I
three-digit pool access code).
f
3. Press .
4. Dial the two-digit Personal Speed Dial code (80—99).
If you did not specify an outside line or pool, the system automatically selects one, turns on the
speaker if the handset is in the cradle, and dials the number. The number being dialed shows
on a display telephone.
Using Personal Speed Dial on a Single-Line
Telephone
You can dial Personal Speed Dial on a single-line telephone, but the numbers must be
programmed from extension 10 or 11. To dial a programmed Personal Speed Dial number:
1. Lift the handset.
You hear intercom dial tone.
#
2. Press .
3. Dial the two-digit Personal Speed Dial code (80—99).
The system automatically selects an outside line and dials the number.
Speed Dialing Features
8-56
*
,
h !
(Pause),
S
before dialing:
#
, and special dialing functions that you can
S
(Stop), (Recall), and
&
(Touch-Tone
i8 and the two-
i
and the