Avaya PARTNER ACS Installation And Use Manual page 24

®
PARTNER Advanced Communications System Installation, Programming, and Use
System Telephones
System telephones include the following:
PARTNER telephones
I
– PARTNER-34D
– PARTNER-18D
– PARTNER-18
– PARTNER-6
MLS telephones
I
MLC-6
I
©
TransTalk 9000-series wireless telephones
I
Available in Release 5.0 or later, PARTNER ACS supports PARTNER Endeavor telephones when
an Endeavor 362EC module is installed in the carrier. The Endeavor telephones include:
PARTNER Endeavor-34D
I
PARTNER Endeavor-18D
I
PARTNER Endeavor-18
I
PARTNER Endeavor-6
I
Only the PARTNER telephones are discussed in this guide (see
Telephones"). For information about an MLS, MLC, TransTalk 9000-series, or PARTNER Endeavor
telephone, refer to the documentation that came with the telephone.
Intercom Autodialers
PARTNER telephones support the PARTNER-CA48 Call Assistant Intercom Autodialer at
extensions 10 and 11. The autodialer provides Auto Dial buttons for all of the extensions in your
system. The status lights next to each button also indicate calling activity at that extension. You
can program the Auto Dial buttons for either intercom ringing, voice signaling, or manual
signaling. (Each user can have only one Auto Dial button–either on the system telephone or on
the autodialer–for another extension in the system.) The Auto Dial buttons allow you to dial,
signal, or transfer calls to system extensions with one touch.
Single-Line Telephones
You can also use industry-standard single-line rotary or touch-tone telephones, including feature
telephones with built-in feature buttons and lights, with the system. Certain single-line telephones
are recommended because of their compatibility with the Message Waiting Light capability of the
system.
For message waiting capability, you must connect single-line telephones with LED-
compatible Message Waiting Lights.
System Components
1-14
Chapter 6, "Using the