Using Group Calling-Ring/Page On A System Telephone; Using Group Calling-Ring/Page On A Single-Line Telephone - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Using Group Calling–Ring/Page on a System
Telephone
To use the programmed button:
To ring or page the Calling Group, press the programmed button first; then lift the handset.
I
– If you ring the group, all available extensions in the Calling Group ring.
– If you page the group, start talking after the beep.
Your voice is heard through the speakers of all system telephones that are idle or have Do
Not Disturb turned off in the Calling Group. If someone answers the page, you are
connected to that person and the rest of the Calling Group no longer hears the page.
To transfer a call to the Calling Group, while on a call, press the button programmed for
I
ringing a Calling Group. You can hang up or stay on the line to announce the call.
All available extensions in the Calling Group ring.
To manually ring or page a Calling Group:
1. Lift the handset and press
You hear intercom dial tone.
2. Do one of the following:
To make a ringing call, dial
I
All available extensions in the Calling Group ring.
To make a paging call, press
I
Your voice is heard through the speakers of all system telephones that are not busy in the
Calling Group. If someone answers the page, you are connected to that person and the
rest of the Calling Group no longer hears the page.
To manually transfer a call to a Calling Group:
1. While on a call, press
7
2. Dial and a group number (1—4). You can hang up or stay on the line to announce the call.
All available extensions in the Calling Group ring.
Using Group Calling–Ring/Page on a Single-Line
Telephone
To ring or page a Calling Group:
1. Lift the handset.
You hear intercom dial tone.
Group Calling–Ring/Page (I7G/I*7G)
8-36
i
.
7 and a group number (1—4).
*7
and a group number (1—4). After the beep, start talking.
&
.