Ead Configuration; Configuring Ead - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
1) After an endpoint user passes identity authentication, the security policy server
issues the IP address and port number of a security client manager proxy and an
isolation ACL to the router. According to the isolation ACL, the router places the
endpoint user in the isolation zone.
2) The router notifies the portal server of the identity authentication success,
carrying the IP address and port number of the security client manager proxy in
the notification.
3) The portal server notifies the security client of the identity authentication success,
carrying the IP address and port number of the security client manager proxy in
the notification.
4) The security client interacts with the security policy server through the security
client manager proxy, and as required completes virus database and patch
check/update and security authentication.
5) After the endpoint passes security authentication, the security policy server
issues a security ACL to the router to reassign an access right to the endpoint
user and to remove isolation.
If the endpoint user passes security authentication, it can access all network resources;
if not, it can access only the update resources in the isolation zone.

4.2 EAD Configuration

4.2.1 Configuration Prerequisites
Complete necessary AAA and RADIUS configurations.

4.2.2 Configuring EAD

Table 4-1 Configure EAD
To do...
Enter
view
Set the
service type to
portal+
Use the command...
system
system-view
portal
portal service-type plus
3Com Corporation
––
Required
The default portal service type is
normal portal mode.
4-5
Chapter 4 EAD Configuration
Remarks