3Com Router 3000 Ethernet Family
Configuration Guide
7.2.8 Configuring IPSec DPD
I. Creating a DPD structure
Perform the following configuration in system view.
Table 7-28 Create a DPD structure and enter its view
Create a DPD structure and enter its view
Delete the specified DPD structure
If a DPD structure has been referenced by an IKE peer, it cannot be deleted.
II. Configuring timers
Perform the following configuration in DPD structure view.
Table 7-29 Configure timers
Configure the interval for triggering a DPD query
Restore the default interval for triggering a DPD query
Configure the time waiting for a DPD acknowledgment
Restore the default time waiting for a DPD
acknowledgment
By default, the interval for triggering a DPD query is 10 seconds, and the time waiting
for a DPD acknowledgment is five seconds.
III. Specifying a DPD structure for an IKE peer
Perform the following configuration in IKE peer view.
Table 7-30 Specify a DPD structure for an IKE peer
Specify a DPD structure for the IKE peer
Remove the referenced DPD structure
Operation
Operation
Operation
3Com Corporation
7-26
Chapter 7 IPSec Configuration
Command
ike dpd dpd-name
undo ike dpd dpd-name
Command
interval-time seconds
undo interval-time
time-out seconds
undo time-out
Command
dpd dpd-name
undo dpd