Configuring A Local Radius Authentication Server - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Table 2-31 Enable the RADIUS server to send traps when it goes down
Enable the RADIUS server to send traps
when it goes down
Disable the RADIUS server to send
traps when it goes down
By default, the RADIUS server does not send traps when it goes down.

2.3.14 Configuring a Local RADIUS Authentication Server

The 3Com router provides a simple local RADIUS server function for authentication
and authorization, which is called the local RADIUS authentication server function.
The following table describes the local RADIUS authentication server configuration
tasks.
Table 2-32 Configure a local RADIUS authentication server
Configure
authentication server
Disable a local RADIUS authentication
server
By default, the system creates a local RADIUS authentication server with the NAS-IP of
127.0.0.1 and the key of huawei.
Note:
With the local RADIUS authentication server function, the UDP port for
authentication/authorization service must be 1645, and the UDP port for accounting
service must be 1646.
The packet encryption key configured using the local-server nas-ip command
must be identical to that configured using the key authentication command in
RADIUS scheme view.
Up to 16 local RADIUS authentication servers can be configured, including the one
created by the system by default.
Operation
Operation
a local RADIUS
3Com Corporation
2-29
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Command
radius
{ authentication-server-down
accounting-server-down }
undo
{ authentication-server-down
accounting-server-down }
Command
local-server nas-ip ip-address key
password
undo local-server nas-ip ip-address
Configuration
trap
radius trap
|
|