3Com 3C13636 Configuration Manual page 1053

3Com Router 3000 Ethernet Family
Configuration Guide
Enter interface view
Enable
authentication
interface
Display
configuration information
and statistics
Clear
statistics
Use the corresponding undo command to remove the configuration.
Caution:
For an application supporting portal authentication for non-directly connected
network segments, you can configure direct authentication only.
When configuring a portal server for the first time, you must specify its IP address.
To modify the parameters of a portal server which is referenced by an interface, you
must first remove the reference.
Whenever there are users, regardless the states of the users, you are strongly
recommended not to configure the undo portal command. Instead, you can
perform configuration on the RADIUS server to force the users to log out.
When configuring the RADIUS scheme, you must configure the server type as
portal.
The portal server and the router must be configured with either fast authentication or
normal authentication concurrently. Otherwise, the user will not be successfully
authenticated or will be able to access the Internet without being authenticated.
To do... Use the command...
interface
interface-num
portal
on an portal server-name
display portal [ acm
statistics | auth-network
[
interface-type
portal interface-num
free-user
interface [ interface-type
interface-num ] | server
[server-name ] | server
statistics
statistics]
reset portal { acm |
portal-related
server
statistics
3Com Corporation
interface-type
auth-interface
] |
| free-ip |
| tcp-cheat
| tcp-cheat }
3-5
Chapter 3 Portal Configuration
Remarks
Required
Required
Available for use in any
view
Available for use in user
view