3Com 3C13636 Configuration Manual page 988

3Com Router 3000 Ethernet Family
Configuration Guide
[3Com-l2vpn-vpna-ce-ce-c] ce ce-c id 3 range 4
# Configure connection with CE-A.
[3Com-l2vpn-vpna-ce-ce-c] connection atm0/0/0.1
# Configure remote connection with CE-B.
[3Com-l2vpn-vpna-ce-ce-c] connection atm0/0/0.2
# Configure connection for future expansion.
[3Com-l2vpn-vpna-ce-ce-c] connection atm0/0/0.3 ce-offset 4
[3Com-l2vpn-vpna-ce-ce-c] connection atm0/0/0.4
3) Configure P:
# Configure MPLS RD, globally enable MPLS and MPLS L2VPN.
[3Com] mpls lsr-id 192.1.1.3
[3Com] mpls
[3Com-mpls] mpls ldp
# Assign an address to the loopback interface.
[3Com] interface loopback 0
[3Com-LoopBack0] ip address 192.1.1.3 255.255.255.255
# Configure the serial interface.
[3Com-LoopBack0] interface serial 0/0/0
[3Com-Serial0/0/0] link-protocol ppp
[3Com-Serial0/0/0] ip address 168.1.1.2 255.255.0.0
[3Com-Serial0/0/0] mpls
[3Com-Serial0/0/0] mpls ldp enable
[3Com] interface serial 1/0/0
[3Com-Serial1/0/0] link-protocol ppp
[3Com-Serial1/0/0] ip address 169.1.1.2 255.255.0.0
[3Com-Serial1/0/0] mpls
[3Com-Serial1/0/0] mpls ldp enable
# Enable OSPF.
[3Com] ospf 1
[3Com-ospf-1] area 0.0.0.0
[3Com-ospf-1-area-0.0.0.0] network 192.1.1.3 0.0.0.0
[3Com-ospf-1-area-0.0.0.0] network 168.1.0.0 0.0.255.255
[3Com-ospf-1-area-0.0.0.0] network 169.1.0.0 0.0.255.255
# Configure LSP, LSP setup triggering between PE1 and PE2.
[PE1] mpls
[PE1-mpls] lsp-trigger all
3Com Corporation
4-28
Chapter 4 MPLS L2VPN Configuration