3Com 3C13636 Configuration Manual page 802

3Com Router 3000 Ethernet Family
Configuration Guide
[RTA] interface loopback10
[RTA-LoopBack10] ip address 10.1.1.1 255.255.255.255
[RTA-LoopBack10] pim sm
[RTA-LoopBack10] quit
# Configure the IP address of interface Ethernet0/0/0 and enable PIM-SM.
[RTA] interface ethernet 0/0/0
[RTA-Ethernet0/0/0] ip address 10.25.2.3 255.255.255.0
[RTA-Ethernet0/0/0] pim sm
[RTA-Ethernet0/0/0] undo shutdown
[RTA-Ethernet0/0/0] quit
# Configure the IP address of interface Serial1/1/0 and enable PIM-SM.
[RTA] interface serial 1/1/0
[RTA-Serial1/1/0] ip address 10.25.3.1 255.255.255.0
[RTA-Serial1/1/0] pim sm
[RTA-Serial1/1/0] undo shutdown
[RTA-Serial1/1/0] quit
# Configure OSPF.
[RTA] ospf
[RTA-ospf-1] area 0
[RTA-ospf-1-area-0.0.0.0] network 10.25.2.0 0.0.0.255
[RTA-ospf-1-area-0.0.0.0] network 10.1.1.1 0.0.0.0
[RTA-ospf-1-area-0.0.0.0] network 10.25.1.1 0.0.0.0
[RTA-ospf-1-area-0.0.0.0] quit
[RTA-ospf-1] quit
# Configure the IBGP peer RTE.
[RTA] bgp 100
[RTA-bgp] undo synchronization
[RTA-bgp] group rte internal
[RTA-bgp] peer 10.26.1.2 group rte
[RTA-bgp] peer rte connect-interface loopback0
[RTA-bgp] peer rte next-hop-local
[RTA-bgp] ipv4-family multicast
[RTA-bgp-af-mul] peer rte enable
[RTA-bgp-af-mul] peer 10.26.1.2 group rte
[RTA-bgp-af-mul] peer rte next-hop-local
[RTA-bgp-af-mul] quit
# Configure the IBGP peer RTF.
[RTA-bgp] group rtf internal
[RTA-bgp] peer 10.27.1.2 group rtf
[RTA-bgp] peer rtf connect-interface loopback0
3Com Corporation
5-19
Chapter 5 MSDP Configuration