3Com 3C13636 Configuration Manual page 1241

3Com Router 3000 Ethernet Family
Configuration Guide
[RouterA-virtual-template1] ip address ppp-negotiate
[RouterA-virtual-template1] ppp pap local-user vpdnuser password simple Hello
[RouterA-virtual-template1] ppp authentication-mode pap
[RouterA-virtual-template1] quit
# Configure static routing to private network 10.1.0.0
[RouterA] ip route-static 10.1.0.0 16 virtual-template 1
# Add a user name and password.
[RouterA] local-user vpdnuser
[RouterA-luser-vpdnuser] password simple Hello
[RouterA-luser-vpdnuser] service-type ppp
# Configure interface Serial 1/0/0.
[RouterA] interface serial1/0/0
[RouterA-Serial1/0/0] ip address 3.3.3.1 255.255.0.0
[RouterA-Serial1/0/0] quit
2) Configure Router B, or the LNS-side router
# Configure username and password
[RouterB] local-user vpdnuser
[RouterB-luser-vpdnuser] password simple Hello
[RouterB-luser-vpdnuser] service-type ppp
# Enable L2TP and set an L2TP group
[RouterB] l2tp enable
[RouterB] l2tp-group 1
# Configure virtual template 1
[RouterB] interface virtual-template 1
[RouterB-virtual-template1] ip address 192.168.0.20 255.255.255.0
[RouterB-virtual-template1] remote
[RouterB-virtual-template1] ppp authentication-mode pap
[RouterB-virtual-template1] quit
# Configure domain information.
[RouterB] domain system
[3Com2-isp-system] scheme local
[3Com2-isp-system] ip pool 1 192.168.0.1 192.168.0.10
[3Com2-isp-system] quit
# Configure the local tunnel name and the remote name of the receive tunnel
[RouterB] l2tp-group 1
[RouterB-l2tp1] tunnel name LNS
[RouterB-l2tp1] allow l2tp virtual-template 1 remote LAC
# Enable tunnel authentication and set the password
address
3Com Corporation
2-34
Chapter 2 Configuration of L2TP
pool 1