3Com 3C13636 Configuration Manual page 782

3Com Router 3000 Ethernet Family
Configuration Guide
<RouterB> system-view
[RouterB] multicast routing-enable
[RouterB] interface serial 1/0/0
[RouterB-Serial1/0/0] pim sm
[RouterB-Serial1/0/0] ip address 10.16.3.2 24
[RouterB-Serial1/0/0] quit
[RouterB] interface serial 1/1/0
[RouterB-Serial1/1/0] pim sm
[RouterB-Serial1/1/0] ip address 10.16.5.2 24
[RouterB-Serial1/1/0] quit
[RouterB] interface serial 4/0/0
[RouterB-Serial4/0/0] pim sm
[RouterB-Serial4/0/0] ip address 10.16.6.2 24
[RouterB-Serial4/0/0] quit
# Configure a BSR candidate.
[RouterB] pim
[RouterB-pim] c-bsr serial 1/0/0 30 2
[RouterB-pim] quit
# Configure an RP candidate.
[RouterB] acl number 2005
[RouterB-acl-basic-2005] rule permit source 224.0.1.1 0 0.255.255.255
[RouterB-acl-basic-2005] quit
[RouterB] pim
[RouterB-pim] c-rp serial 1/0/0 group-policy 2005
[RouterB-pim] quit
# Configure PIM boundary.
[RouterB] interface serial4/0/0
[RouterB-Serial4/0/0] pim bsr-boundary
# Enable OSPF on interfaces Serial4/0/0, Serial1/0/0, and Serial1/1/0.
[RouterC] ospf
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] network 10.16.3.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] network 10.16.5.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] network 10.16.6.0 0.0.0.255
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
4) Configure Host A
Connect Host to Multicast Source using HTTP, and select the Movie Online program on
the client software.
5) Configure Multicast Source
3Com Corporation
4-20
Chapter 4 PIM Configuration