3Com 3C13636 Configuration Manual page 806

3Com Router 3000 Ethernet Family
Configuration Guide
# Assign an IP address to interface serial 1/0/0 and enable PIM-SM on it.
[RTA] interface serial 1/0/0
[RTA-Serial1/0/0] ip address 10.25.3.2 255.255.255.0
[RTA-Serial1/0/0] pim sm
[RTA-Serial1/0/0] quit
# Assign an IP address to interface ethernet0/0/0 and enable PIM-SM and IGMP on it.
[RTG] interface ethernet0/0/0
[RTG-ethernet0/0/0] ip address 20.1.1.1 255.255.255.255
[RTG-ethernet0/0/0] pim sm
[RTG-ethernet0/0/0] igmp enable
[RTG-ethernet0/0/0] quit
# Configure an MSDP peer and Originating RP.
[RTA] msdp
[RTA-msdp] static-rpf-peer 10.28.1.1
[RTA-msdp] peer 10.25.1.1 connect-interface loopback 0
[RTA-msdp] originating-rp loopback0
[RTA-msdp] quit
# Configure RP and BSR candidates.
[RTA] pim
[RTA-pim] c-rp loopback 0
[RTA-pim] c-bsr loopback 0 30
5) Configure Multicast Source
On Multicast Source associate multicast programs with multicast addresses, for
example, Movie Online with 224.0.1.1.
6) Configure the Receivers
Connect the Receivers to Multicast Source using HTTP, and select the Movie Online
program on the client software.
3Com Corporation
5-23
Chapter 5 MSDP Configuration