3Com 3C13636 Configuration Manual page 1427

3Com Router 3000 Ethernet Family
Configuration Guide
Table 1-19 Implement PPP callback (server configuration) in RS-DCC
Configure a callback PPP user
Configure the callback number of the
PPP user
Configure the local end to be the PPP
callback server
Disable the local end to be the PPP
callback server
Configure the PPP callback reference
Disable the callback server function of
the router
By default, the system does not enable the callback function.
III. Configuring local authentication of PPP callback
Callback users can be authenticated not only by username/password but also by
callback number.
Table 1-20 Configure local user authentication for PPP callback
Configure a username
Remove a user
Configure the password
Cancel the password
Configure user callback authentication
Cancel user callback authentication
Configure the callback attribute
Delete the callback attribute
By default, neither callback number nor authentication is set.
Operation
Operation
3Com Corporation
1-26
Chapter 1 DCC Configuration
Command
local-user username
service-type ppp
callback-number
ppp callback server
undo ppp callback server
dialer callback-center dial-number
undo dialer callback-center
Command
local-user username
undo local-user username
password { simple | cipher } password
undo password
service-type ppp callback-nocheck
undo service-type
callback-nocheck
service-type ppp
call-number [ subcall-number ]
undo service-type ppp call-number
call-number [ subcall-number ]
callback-number
ppp
call-number