Aaa And Radius/Hwtacacs Configuration Example; Telnet/Ssh User Authentication/Accounting Using Radius Server - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Disable RADIUS packet debugging.
Clear stop-accounting packets from the
buffer.
Reset the statistics of RADIUS server.
Table 2-49 Display and debug the HWTACACS protocol
Display
HWTACACS schemes.
Display
stop-accounting packets in the buffer.
Enable HWTACACS debugging.
Disable HWTACACS debugging.
Clear stop-accounting packets from the
buffer.
Reset the statistics about TACACS
servers.

2.6 AAA and RADIUS/HWTACACS Configuration Example

2.6.1 Telnet/SSH User Authentication/Accounting Using RADIUS Server

Note:
Configuring authentication and accounting on the RADIUS server for SSH users is
similar to Telnet users. The following example is based on Telnet users.
At present, RADIUS and HWTACACS do not support FTP user accounting.
Operation
Operation
the specified or
information on
3Com Corporation
Chapter 2 AAA and RADIUS/HWTACACS Protocol
undo debugging radius packet
reset
{ radius-scheme radius-scheme-name |
session-id session-id | time-range
start-time
user-name }
reset radius statistics
all the display
[ hwtacacs-scheme-name [ statistics ] ]
display
the
hwtacacs-scheme
hwtacacs-scheme-name
debugging hwtacacs { all | error |
event | message | receive-packet |
send-packet }
undo debugging hwtacacs { all | error
| event | message | receive-packet |
send-packet }
reset
{
hwtacacs-scheme-name }
reset hwtacacs statistics {accounting
| authentication | authorization | all }
2-38
Configuration
Command
stop-accounting-buffer
stop-time | user-name
Command
hwtacacs
stop-accounting-buffer
stop-accounting-buffer
hwtacacs-scheme