3Com 3C13636 Configuration Manual page 803

3Com Router 3000 Ethernet Family
Configuration Guide
[RTA-bgp] peer rtf next-hop-local
[RTA-bgp] ipv4-family multicast
[RTA-bgp-af-mul] peer rtf enable
[RTA-bgp-af-mul] peer rtf next-hop-local
[RTA-bgp-af-mul] quit
# Configure the EBGP peer RTG.
[RTA-bgp] group rtg external
[RTA-bgp] peer 10.28.1.1 group rtg as-number 200
[RTA-bgp] peer rtg next-hop-local
[RTA-bgp] peer rtg default-route-advertise
[RTA-bgp] peer rtg ebgp-max-hop 255
[RTA-bgp] ipv4-family multicast
[RTA-bgp-af-mul] peer 10.28.1.1 group rtg
[RTA-bgp-af-mul] peer rtg enable
[RTA-bgp-af-mul] peer rtg next-hop-local
[RTA-bgp-af-mul] quit
[RTA-bgp] quit
# Configure MSDP peer, Mess Group and Originating RP.
[RTA] msdp
[RTA-msdp] static-rpf-peer 10.28.1.1
[RTA-msdp] peer 10.28.1.1 connect-interface loopback 0
[RTA-msdp] peer 10.26.1.2 connect-interface loopback 0
[RTA-msdp] peer 10.27.1.2 connect-interface loopback 0
[RTA-msdp] peer 10.26.1.2 mesh-group net
[RTA-msdp] peer 10.27.1.2 mesh-group net
[RTA-msdp] originating-rp loopback0
[RTA-msdp] quit
# Configure the candidate RP and BSR.
[RTA] pim
[RTA-pim] c-rp loopback 10
[RTA-pim] c-bsr loopback 0 30
2) Configure RTE:
# Enable multicast.
[RTE] multicast routing-enable
# Configure the IP address of interface Loopback0 and enable PIM-SM.
[RTE] interface loopback0
[RTE-LoopBack0] ip address 10.26.1.2 255.255.255.255
[RTE-LoopBack0] pim sm
[RTE-LoopBack0] quit
# Configure the IP address of interface loopback10 and enable PIM-SM.
3Com Corporation
5-20
Chapter 5 MSDP Configuration