Configuring A Dvpn Policy - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Table 4-23 Configure the pre-shared key of the DVPN server
Configure the pre-shared key of the DVPN server
Remove the configured pre-shared key
No pre-shared key of the DVPN server is configured by default.
VI. Configuring the user name and password of the client
When registering with a DVPN server that authenticates clients, a client must provide
its user name and password. Use this command to configure the user name and
password of the client.
Perform the following configuration in DVPN class view.
Table 4-24 Configure the user name and password of the client
Configure the user name and password
of the client
Remove the user name and password
of the client
A client is not configured with a user name and password by default.

4.2.5 Configuring a DVPN Policy

In DVPN policy view, you can configure the DVPN policy information, such as session
algorithm, IPSec algorithm for data, and time parameters. A DVPN server issues the
DVPN policy used in the DVPN domain to the registered clients.
Caution:
To modify or apply a configured policy, you must reboot the router or configure the
shutdown/undo shutdown command on the tunnel interface. Otherwise, the new
policy will not take effect.
Operation
Operation
3Com Corporation
4-20
Command
pre-shared-key key
undo pre-shared-key
Command
local-user username
{ simple | cipher } password
undo local-user username
Chapter 4 DVPN
password