3Com 3C13636 Configuration Manual page 918

Router 3000 ethernet family
Hide thumbs Also See for 3C13636:
Table of Contents

Advertisement

3Com Router 3000 Ethernet Family
Configuration Guide
[PE1] bgp 100
[PE1-bgp] group 2
[PE1-bgp] peer 2.2.2.2 group 2
[PE1-bgp] peer 2.2.2.2 connect-interface loopback 0
[PE1-bgp] group 3
[PE1-bgp] peer 3.3.3.3 group 3
[PE1-bgp] peer 3.3.3.3 connect-interface loopback 0
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpn] peer 2 enable
[PE1-bgp-af-vpn] peer 2.2.2.2 group 2
[PE1-bgp-af-vpn] peer 3 enable
[PE1-bgp-af-vpn] peer 3.3.3.3 group 3
[PE1-bgp-af-vpn] quit
2)
Configure PE2
Note:
The configuration of PE2 is similar to that of PE1, so only VPN-instance configuration is
detailed here.
# Create two VPN-instances 2.1 and 2.2 respectively for CE1 and CE2 on PE2,
configure different VPN-targets for them.
[PE2] ip vpn-instance vpn-instance2.1
[PE2-vpn- vpn-instance2.1] route-distinguisher 2.2.2.2:1
[PE2-vpn- vpn-instance2.1] vpn-target 2.2.2.2:1
[PE2-vpn- vpn-instance2.1] vpn-target 1.1.1.1:1 import-extcommunity
[PE2-vpn- vpn-instance2.1] vpn-target 3.3.3.3:1 import-extcommunity
[PE2-vpn- vpn-instance2.1] quit
[PE2] ip vpn-instance vpn-instance2.2
[PE2-vpn- vpn-instance2.2] route-distinguisher 2.2.2.2:2
[PE2-vpn- vpn-instance2.2] vpn-target 2.2.2.2:2
[PE2-vpn- vpn-instance2.2] vpn-target 1.1.1.1:2 import-extcommunity
[PE2-vpn- vpn-instance2.2] vpn-target 3.3.3.3:2 import-extcommunity
[PE2-vpn- vpn-instance2.2] quit
# Set up EBGP adjacency between PE2 and CE1, redistribute intra-CE1 VPN routes
learned into VPN-instance2.1.
[PE2] bgp 100
[PE2-bgp] ipv4-family vpn-instance vpn-instance2.1
[PE2-bgp-af-vpn-instance] group 17212 external
[PE2-bgp-af-vpn-instance] peer 172.12.12.2 group 17212 as-number 65001
Chapter 3 BGP/MPLS VPN Configuration
3Com Corporation
3-56

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c13636-us - router 30363000 series

Table of Contents