3Com 3C13636 Configuration Manual page 779

3Com Router 3000 Ethernet Family
Configuration Guide
[3Com-ospf-1-area-0.0.0.0] network 10.16.4.0 0.0.0.255
[3Com-ospf-1-area-0.0.0.0] quit
[3Com-ospf-1] quit
3) Configure Router C:
# Enable multicast.
<3Com> system-view
[3Com] multicast routing-enable
# Enable PIM-DM on the interfaces Serial1/1/0 and Ethernet2/0/0.
[3Com] interface serial 1/1/0
[3Com-Serial1/1/0] pim dm
[3Com-Serial1/1/0] ip address 10.16.2.2 24
[3Com-Serial1/1/0] quit
[3Com] interface ethernet 2/0/0
[3Com-Ethernet2/0/0] igmp enable
[3Com-Ethernet2/0/0] pim dm
[3Com-Ethernet2/0/0] ip address 10.16.5.1 24
# Enable OSPF on interfaces Ethernet2/0/0 and Serial1/1/0.
[3Com] ospf
[3Com-ospf-1] area 0
[3Com-ospf-1-area-0.0.0.0] network 10.16.1.0 0.0.0.255
[3Com-ospf-1-area-0.0.0.0] network 10.16.5.0 0.0.0.255
[3Com-ospf-1-area-0.0.0.0] quit
[3Com-ospf-1] quit
4) Configure Multicast Source
On Multicast Source associate multicast programs with multicast addresses, for
example, Movie Online with 224.0.1.1.
5) Configure Receiver1/2
Connect Receiver to Multicast Source using HTTP, and select the Movie Online
program on the client software.
4.5.2 PIM-SM Configuration
I. Network requirements
In the following figure, Host A is a receiver of the Movies Online program provided by
Multicast Source. On Router B, specify interface Serial1/0/0 as an RP candidate and
BSR candidate.
3Com Corporation
4-17
Chapter 4 PIM Configuration