3Com 3C13636 Configuration Manual page 978

3Com Router 3000 Ethernet Family
Configuration Guide
[3Com] mpls
# Globally enable MPLS L2VPN.
[3Com]mpls l2vpn
# Configure the interface SERIAL 0/0/0.
[3Com] interface serial 0/0/0
[3Com-Serial0/0/0] link-protocol ppp
# Enable MPLS on the interface SERIAL1/0/0.
[3Com] interface serial 1/0/0
[3Com-Serial1/0/0] link-protocol ppp
[3Com-Serial1/0/0] mpls
# Configure a static LSP, with the out-label 100 and outgoing interface SERIAL 1/0/0.
[3Com-mpls]
outgoing-interface serial 1/0/0 out-label 200 pre 2 metric 3
# Configure a static LSP, with the in-label 201 and incoming interface SERIAL 1/0/0.
[3Com-mpls] static-lsp egress PEA-PEB l2vpn incoming-interface serial 1/0/0
in-label 101
# Configure a remote connection.
[3Com] ccc remote-conn interface serial1/0/0 transmit-lsp PEB-PEA receive-lsp
PEA-PEB
3) Configure P:
[3Com] mpls lsr-id 10.0.0.2
[3Com] mpls
[3Com-mpls] mpls l2vpn
# Configure a static LSP, with the in-label 100, incoming interface SERIAL0/0/0,
out-label 101, and the outgoing interface SERIAL1/0/0.
[3Com-mpls] static-lsp transit PEA-PEB l2vpn incoming-interface serial 0/0/0
in-label 100 outgoing-interface serial 1/0/0 out-label 101
# Configure a static LSP, with the in-label 200, incoming interface SERIAL1/0/0,
out-label 201, and the outgoing interface SERIAL0/0/0.
[3Com-mpls] static-lsp transit PEB-PEA l2vpn incoming-interface serial1/0/0
in-label 200 outgoing-interface serial 0/0/0 out-label 201
Caution:
The conditions for a CCC local connection to enter UP state:
The physical states of the two CE interfaces are in UP state.
static-lsp ingress
3Com Corporation
4-18
Chapter 4 MPLS L2VPN Configuration
PEB-PEA destination 10.0.0.0 l2vpn